| Technical features |
| Feeds: |
No. 8 for all diameters; |
| Actuators: |
No. 2 for each feed, each with 16 levels, to work with 8 feeds with 3 technical ways; |
| Yarn fingers : |
No 7 for each feed station; N° 2 for each colour station; |
| Vertical trappers for bare or covered elastic yarns: |
No. 2 for each feed; |
| Suction intakes : |
No. 1 on each feed; |
| Stitch regulation : |
using independent stepper motors for each feed with the possibility of widening and shrinkage the same course; |
| Diameters: |
From 13" to 17"; |
| Machine gauge : |
From 16 to 32; |
| Needle gauge : |
From 48 to 75; |
| Speed: |
From 100 to 150 RPM depending on the cylinder diameter and the work process; |
| Weight: |
Approx 800 Kg |
| Programming: |
from the computer thanks to the Supergraphics software with the possibility of modifying the program directly on board the machine; |
| |
Electronic equipment designed for connection to the Supervisor data acquisition system in order to monitor the production data; |
| Take-down system: |
suction with 2 fans or centralized system; the machine is equipped standard with rotating tube to avoid torsion on the product; |
| Feeders: |
No. 8 Memminger IRO SFE; No 10 BTSR-KTF 100 / Memminger EFS 610. |
| Production features |
| • Underwear, outerwear, spotrswear and swimwear and medical garments; |
| • Welt: single or duble with different selections and medical garments; |
| • Possibility of making patterns or script with the patented Sangiacomo system that achieves perfect colour definition and consequently also that of the pattern. |
| Optionals |
• Feeders: Memminger ELAN 2; ROJ Tricot o LGL Primo;
|
| • Creel for cotton. |
| • Aspirated creel for cotton |
| • Terry kit. |
